Top 10 Dredgers in the World
Here is the list of Top 10 Dredgers in the World, Large dredges that are used to cut and extract material from the seabed and raise it to the surface, allowing for the construction of various types of coastal structures. These are the top ten most incredible Dredgers on the planet.
What are Dredging and dredgers?
Dredging is the process of shifting dirt underwater. It can be used for a variety of applications. By removing mud, sludge, gravel, and boulders, one of the applications addresses the need to maintain minimum depths in canals and harbors.
Environmental dredging and clean-up of contaminated sediments; replenishment of beaches and coastlines, not only for coastal protection, but also for recreational uses; creating new land for port and industrial development; trenching, backfilling, and protection work for offshore pipelines, coastal outfall pipelines, and cables laid on the sea bed; environmental dredging and clean-up of contaminated sediments, Dredging can be done in two ways: mechanical excavating and hydraulic excavating. On cohesive soils, mechanical excavation is used. Mechanical grabs, buckets, cutter heads, and scoops are used to excavate and remove the dredged material.
In cohesionless soils like silt, sand, and gravel, hydraulic digging is done with specific water jets. Using centrifugal pumps, the dredged material that has been freed from the seabed is sucked up and transported as a mixture (solid material and water).
Types of Dredgers
- Mechanical dredgers
- Backhoe dredger
- Bucket chain dredger
- Cutter suction dredger
- Grab dredger
- Suction dredgers
- Plain suction dredger
- Trailing suction hopper dredger ( TSHD )
List of Top 10 Dredgers in the World
10. Magnor ( Best Dredger Machine )
It is a heavy-duty backhoe dredger that was built in 2016 and sails under the Cypress flag. It has a hydraulic arm with 4 500 horsepower and a bucket with a 40 cubic meter capacity. Three stabilization piles are used. It stands 40 meters tall and can reach a maximum depth of 27 meters.
It is 74 meters long and 20 meters broad, with a gross tonnage of 2 300 tons and a cargo capacity of 690 tons. It has one engine with a total output of 5 500 horsepower and can attain speeds of more than 11 knots.
9. Mahury ( Best Dredger Machine )
It is a trailing suction hopper dredger that was launched in 2016 and sails under the Dutch flag. It may operate at various distances from the coast, accumulating material in the hopper or ejecting it overboard. It can work at a depth of 30 meters, with an 1800 cubic meter hopper.
It is 75 meters long and 13 meters broad, with a gross tonnage of 1 700 tons and a cargo capacity of 1 600 tons. It is powered by two engines, totaling 1 900 horsepower, and can reach a speed of 9 knots.
8. Minerva ( Best Dredger Machine )
It is a trailing suction hopper dredger that was built in 2017 and sails under the Belgian flag. It was the world’s first trailing suction hopper dredger to run on liquefied natural gas, satisfying international emission standards. It can operate to a depth of 30 meters and has a 3500 cubic meter hopper.
It is 84 meters long and 18 meters wide, with a gross tonnage of 3900 tons and a cargo capacity of 2700 tons. It is powered by two engines totaling 6500 horsepower and can reach a top speed of 12 knots.
7. Shanti Sagar ( Best Dredger Machine )
It is a trailing suction hopper dredger that was built in 2017 and sails under the Indian flag. This ship is distinguished by the novel shape of its external construction, high-performance pumping systems, and an 8 000 cubic meter hopper.
She is 107 meters long and 24 meters wide, with a gross tonnage of 8 200 tons and a cargo capacity of 10 300 tons. She is powered by two engines, each producing 9700 horsepower, and can reach a top speed of 13 knots.
6. Arzana ( Best Dredger Machine )
It is a trailing suction hopper dredger that was built in 2018 and sails under the flag of the United Arab Emirates. This new generation vessel was designed to perform in extreme temperatures. It can work at a depth of 35 meters and has a hopper capacity of 6,000 cubic meters. It is 109 meters long and 25 meters broad, with a gross tonnage of 7 700 tons and a cargo capacity of 9 300 tons. It is powered by two engines totaling 11 300 horsepower and can attain speeds of more than 11 knots.
5. DC Orisant ( Best Dredger Machine )
It is a trailing suction hopper dredger that sails under the Dutch flag and was built in 2018. It is used to install offshore wind farms and has a bucket wheel mechanism.
It can operate at a depth of 35 meters and has a 5400 cubic meter hopper. It is 142 meters long and 23 meters broad, with a gross tonnage of 8 800 tons and a cargo capacity of 10 700 tons. It is powered by two engines totaling 6 700 horsepower and can reach a top speed of 16 knots.
4. Mohab Mameesh ( Best Dredger Machine )
It’s an Egyptian-flagged cutter suction dredger that was built in 2021. It’s meant to work in the hardest conditions at depths of up to 35 meters, and it’s used to maintain and develop the artificial area between the Mediterranean and Red Seas in the Suez Canal.
It is 147 meters long and 23 meters broad, with a gross tonnage of 8 800 tons and a cargo capacity of 2416 tons. It is powered by two engines totaling 39 100 horsepower and can attain speeds of more than 11 knots.
3. Krios ( Best Dredger Machine )
It is a cutter suction dredger that was built in 2020 and sails under the Cypress flag. Its great pumping capacity and cutting power enable it to dredge exceptionally hard soils. It can work at a maximum depth of 35 meters and has an 1800 cubic meter hopper.
It is 152 meters long and 28 meters broad, with a gross tonnage of 8900 tons and a cargo capacity of 3 600 tons. It is powered by one engine with a total output of 31 500 horsepower and can attain speeds of over 11 knots.
2. Jun Yang 1 ( Best Dredger Machine )
It is a trailing suction hopper dredger that was built in 2016 and sails under the Chinese flag. It is built for deep dredging and has two 1.2 meter diameter suction tubes. It can work at a depth of up to 90 meters and has a 21 000 cubic meter hopper.
It is 170 meters long and 31 meters wide, with a gross tonnage of 20,600 tons and a cargo capacity of 33 200 tons. It has two engines that produce a total of 21 800 horsepower and can attain speeds of more than 12 knots.
1. Spartacus ( Best Dredger Machine )
It is a cutter suction dredger that was built in 2021 and sails under the Belgian flag. It can work at a maximum depth of 45 meters and has an 8400 cubic meter hopper. It can work at a depth of 45 meters and uses liquefied natural gas.
It is 164 meters long and 34 meters broad, with a gross tonnage of 18,400 tons and a cargo capacity of 6,400 tons. It is powered by six 59,200 horsepower engines and can only reach speeds of 11 knots.
Thanks for reading, If you like this article share it with your friends.
NEXT
